Feed Command Into New Instance of Bash

When a computer boots up, a kernel (whether it's Linux, BSD, Mach, or NT) recognizes all the physical hardware and enables each component to talk with one another and be orchestrated by some basic software. A computer's most basic set of instructions simply keeps it powered on and in a safe state: activating fans periodically to prevent overheating, using subsystems to monitor disk space or "listen" for newly attached devices, and so on. If this was all computers did, they'd be about as interesting as a convection oven.

Computer scientists recognized this early on, so they developed a shell for Unix computers that operates outside of the kernel (or around the kernel, like a shell in nature) and allows humans to interact with the computer whenever they want to. It was an exciting development at a time when people were feeding punchcards into computers to tell them what to do. Of all the shells available, Bash is one of the most popular, the most powerful, and the most friendly.

Bash is an application

When you start a terminal (such as the GNOME Terminal or Konsole on Linux or iTerm2 on macOS) running the Bash shell, you're greeted with a prompt. A prompt is a symbol, usually a dollar sign ($), indicating that the shell is waiting for your input. Of course, knowing what you're supposed to type is another matter entirely.

This probably comes across as unfriendly, but it's actually a perfectly succinct representation of the many connotations around the term "Bash." To many new users, there's no separation between the concept of Bash and the concept of Linux or Unix: it's the proverbial black-screen-with-green-text into which you're supposed to code what your computer does next. That conflates the Bash shell with the commands you type into the shell. It's important to understand that they're two separate things: Bash is just an application, and its primary job is to run other applications (in the form of commands) that are installed on the same system.

[Download our free Bash cheat sheet]

You can learn Bash, but only in the context of learning the operating system that it's running on. Without knowing commands, there's not much you can do with Bash.

Linux commands

On Linux and Unix (such as BSD and macOS), most commands are stored by default in system directories like /usr/bin and /bin. By nature, Bash doesn't know these commands any more than you naturally know Klingonese, but just as you can look up Klingon words, Bash can look up commands. When you issue a command to Bash, it searches specific directories on your system to see whether such a command exists. If the command does exist, then Bash executes it.

Bash is also a command, and it's usually the default command executed when you open a terminal window or log into a text console. To find out where any command is located on your system, Bash included, you can use the which command in a terminal:

          
            
$              which              bash              
              /usr/bin/              bash              
              $              which              ls              
              /usr/bin/              ls            
          
        

A few commands are built into Bash. Most built-in commands are specific to Bash scripting or low-level environment settings, but a few are universally useful, such as cd (for change directory). Built-in commands don't show up when you search for them because they don't exist in your usual executable path:

          
            
$              which              bash              
              which: no              cd              in              (              /usr/local/bin:/usr/bin:/bin:
              [...]            
          
        

They're still available, though, because they're built into Bash, and Bash is what you're running.

Running Bash

Most modern Linux and Unix distributions provide a Bash shell by default. They do this because Bash is well-known, and it has several convenience functions that other shells don't. However, some systems use another shell by default. To find out whether you're running a Bash shell, you can use the echo command along with a special variable representing the name of the currently running process:

If you're not running Bash, but you'd like to try it, you can probably download and install Bash from your software center, software repository, or ports tree. Or you can use Chocolatey on Windows or Homebrew on macOS. If all else fails, visit the Bash homepage for more information.

Working in Bash

Bash is a legitimate interface to your computer, and it's not just for server admins and programmers. It can be your desktop, your word processor, your graphics editing application, and much, much more. Some people use Bash more than they use desktop apps.

There are hundreds of commands available for Linux and Unix, and it might surprise you just how diverse they are. For instance, you can resize and crop photos without ever opening the photo in a viewer or editor:

          
            
$ mogrify              -geometry              1600^x800 \
              -gravity              Center \
              -crop              1600x800+0+0              myphoto.jpg
          
        

You can play music with commands like ogg123 or mpg321, convert audio with sox, adjust and edit video with ffmpeg, edit text with emacs or vim, check email with pine or mutt, browse the internet with elinks, browse files with ranger or midnightcommander, and do much, much more. It's all done in Bash, using the commands you find on your system or in your software repository.

Bash scripting

One reason Bash (and Linux in general) is considered so powerful is because it's scriptable. Anything you can type into Bash manually, you can also list in a plain-text file and have Bash run it for you. Instead of spending an afternoon manually running a hundred commands, you can script the commands and have your computer execute them while you tend to more important matters. Because nearly everything on Linux runs on top of the Bash shell, nearly everything on Linux can be scripted through Bash. While there are exceptions to this (graphical applications may have their own scripting language, for instance, or no scripting at all), scripting your OS opens up tens of thousands of possible functions you can make happen on your computer without doing them yourself.

The amount of work this saves Linux users each day is impossible to estimate. It's not the usual automation that makes the difference, though; it's the bespoke workflows that people invent for themselves, the things nobody else thinks need automation.

When experienced users say that they want to learn Bash, if they don't mean they want to learn Linux commands, then they probably mean that they want to improve the way they script their commands. For instance, this is an extremely rudimentary Bash script that converts a temporary file (imagine it's a file created by a separate process) to a specific directory:

          
            
              #!/usr/bin/bash            
            
                            cp              tmp.png ~/public_html/`              date              +%Y%m%d`.png
          
        

That's valid Bash. You can verify it by copying and pasting the command (the last line beginning with cp) into a terminal. As long as there's a file called tmp.png and a directory called ~/public_html, the command works.

Learning Bash, though, is all about understanding how a simple command like this can be improved for the sake of automation. For instance, if the file tmp.png doesn't exist, then the script fails. If this script is a key component to, for instance, a blogging site that requires a new image each day so that a custom header image can be constructed, then the script's failure could cause catastrophic errors elsewhere. A user who knows Bash could add resiliency using Bash syntax:

          
            
              #!/usr/bin/bash            
            
                            IMG="tmp.png"            
            
                            [              [              -e              tmp.png              ]              ]              ||              IMG="generic.png"            
            
                            cp              ~/              "${IMG}"              ~/public_html/`              date              +%Y%m%d`.png
          
        

This is just one example of the process of learning to script with Bash, but it demonstrates how learning both Linux and Bash are equally useful and not entirely separate tasks.

Advantages of Bash

Bash is as powerful as other shells but adds convenience functions like the double brackets ([[ and ]]) in the sample code. These "Bashisms" are much loved by Bash users because they avoid the sometimes verbose and awkward syntax in other shells like tcsh or ash. However, they are unique to Bash and are not POSIX-compliant, which could cause compatibility issues on systems not running Bash. Then again, Bash is open source free software, so most users can install it if they need it. The lack of compatibility only forces an extra dependency and does not exclude anyone from using a script.

Learning Bash

If you want to learn Bash, you can read any number of great books on the subject.

Or, you can take an online course from EdX.org and even join in on some no-cost Red Hat courses.

Best of all, you can also play games to learn Bash.

Good luck, and happy hacking!

This work is licensed under a Creative Commons Attribution-Share Alike 4.0 International License.

amentcuposidere.blogspot.com

Source: https://opensource.com/resources/what-bash

Share this post